2017-12-14  author  <author@debian>

	* README: Release 1.0.8

	* GemPC430/libusb_wrap.c: Fix typo in log message

2012-04-08  author  <author@debian>

	* README: Release 1.0.7

	* GemPC430/Makefile, GemPC410/Makefile: Use CFLAGS and LDFLAGS

	Fix Debian bug #667931

	* GemPC410/GCGBPTransport.c, GemPC410/GemPC410Utils.c, GemPC410/GemPC410Utils.h, GemPC410/Makefile, GemPC410/TODO.txt, GemPC410/gbpserial.c, GemPC410/main.c, GemPC430/GCUSBTransport.c, GemPC430/libusb_wrap.c, GemPC430/usbserial_mosx.c, common/GCUtils.c, common/GCdebug.c, common/GCdebug.h, common/GemCore.h, common/ifdhandler.c:
	Remove extra spaces

	* GemPC430/usbserial.h, GemPC430/usbserial_mosx.c:
	Use status_t insteaf of gcore_t when needed

	GCUSBTransport.c: In function ‘GCSendCommand’:
	GCUSBTransport.c:40:57: attention : comparison between ‘gcore_t’ and ‘enum <anonymous>’ [-Wenum-compare]
	GCUSBTransport.c:47:53: attention : comparison between ‘gcore_t’ and ‘enum <anonymous>’ [-Wenum-compare]

	* GemPC430/libusb_wrap.c: Fix compiler warnings

	libusb_wrap.c: In function ‘OpenUSB’:
	libusb_wrap.c:93:2: attention : format ‘%X’ expects argument of type ‘unsigned int’, but argument 6 has type ‘DWORD’ [-Wformat]
	libusb_wrap.c:129:3: attention : format ‘%X’ expects argument of type ‘unsigned int’, but argument 6 has type ‘DWORD’ [-Wformat]

	* GemPC410/GemPC410Utils.c: Remove dead code

	GemPC410Utils.c: In function ‘OpenGemPC410’:
	GemPC410Utils.c:74:2: attention : comparaison d'une expression non signée < 0 est toujours fausse [-Wtype-limits]

	* GemPC410/gbpserial.c: Fix compiler warning

	gbpserial.c: In function ‘OpenGBP’:
	gbpserial.c:328:2: attention : format ‘%X’ expects argument of type ‘unsigned int’, but argument 6 has type ‘DWORD’ [-Wformat]

	* common/GCUtils.c: Remove dead code

	GCUtils.c: In function ‘iLunCheck’:
	GCUtils.c:46:3: attention : comparaison d'une expression non signée < 0 est toujours fausse [-Wtype-limits]

	* common/GCdebug.c: Fix compiler warnings

	../common/GCdebug.c: In function ‘log_msg’:
	../common/GCdebug.c:22:24: attention : unused parameter ‘priority’ [-Wunused-parameter]
	../common/GCdebug.c: In function ‘log_xxd’:
	../common/GCdebug.c:33:24: attention : unused parameter ‘priority’ [-Wunused-parameter]

	* common/ifdhandler.c: Use %lX and %ld for DWORD types

	ifdhandler.c: In function ‘IFDHCreateChannelByName’:
	ifdhandler.c:51:2: attention : format ‘%X’ expects argument of type ‘unsigned int’, but argument 6 has type ‘DWORD’ [-Wformat]
	ifdhandler.c: In function ‘IFDHCreateChannel’:
	ifdhandler.c:113:2: attention : format ‘%X’ expects argument of type ‘unsigned int’, but argument 6 has type ‘DWORD’ [-Wformat]
	ifdhandler.c:113:2: attention : format ‘%d’ expects argument of type ‘int’, but argument 7 has type ‘DWORD’ [-Wformat]
	ifdhandler.c: In function ‘IFDHCloseChannel’:
	ifdhandler.c:149:2: attention : format ‘%X’ expects argument of type ‘unsigned int’, but argument 6 has type ‘DWORD’ [-Wformat]
	ifdhandler.c: In function ‘IFDHGetCapabilities’:
	ifdhandler.c:184:2: attention : format ‘%X’ expects argument of type ‘unsigned int’, but argument 6 has type ‘DWORD’ [-Wformat]
	ifdhandler.c:184:2: attention : format ‘%X’ expects argument of type ‘unsigned int’, but argument 7 has type ‘DWORD’ [-Wformat]
	ifdhandler.c: In function ‘IFDHSetCapabilities’:
	ifdhandler.c:240:2: attention : format ‘%X’ expects argument of type ‘unsigned int’, but argument 6 has type ‘DWORD’ [-Wformat]
	ifdhandler.c:240:2: attention : format ‘%X’ expects argument of type ‘unsigned int’, but argument 7 has type ‘DWORD’ [-Wformat]
	ifdhandler.c: In function ‘IFDHSetProtocolParameters’:
	ifdhandler.c:269:2: attention : format ‘%X’ expects argument of type ‘unsigned int’, but argument 6 has type ‘DWORD’ [-Wformat]
	ifdhandler.c: In function ‘IFDHPowerICC’:
	ifdhandler.c:326:2: attention : format ‘%X’ expects argument of type ‘unsigned int’, but argument 6 has type ‘DWORD’ [-Wformat]
	ifdhandler.c: In function ‘IFDHTransmitToICC’:
	ifdhandler.c:421:2: attention : format ‘%X’ expects argument of type ‘unsigned int’, but argument 6 has type ‘DWORD’ [-Wformat]
	ifdhandler.c: In function ‘IFDHControl’:
	ifdhandler.c:557:2: attention : format ‘%X’ expects argument of type ‘unsigned int’, but argument 6 has type ‘DWORD’ [-Wformat]
	ifdhandler.c: In function ‘IFDHICCPresence’:
	ifdhandler.c:585:2: attention : format ‘%X’ expects argument of type ‘unsigned int’, but argument 6 has type ‘DWORD’ [-Wformat]

	* common/GCCmds.c: Remove unused variable

2012-02-14  author  <author@debian>

	* GemPC410/gbpserial.c, GemPC410/resetGemPC410.c:
	Fix typo writting -> writing

2010-09-03  author  <author@debian>

	* GemPC430/50-pcscd-ifd-gempc.rules:
	udev rules to set the access rights of GemPC smart card readers so they
	can be used by pcscd

2010-06-16  author  <author@debian>

	* README: release 1.0.6

	* GemPC410/gbpserial.c:
	OpenGBP(): and null fd is valid. Only negative values are errors.

	Thanks to Joerg Hartenberger for the patch

2010-01-03  author  <author@debian>

	* common/GCCmds.c: GCCmdSetMode(): fix a spelling error

2009-04-12  author  <author@debian>

	* README: release 1.0.5

	* GemPC410/resetGemPC410.c: remove "unused parameter" warnings

	* common/ifdhandler.c, GemPC430/GemPC430Utils.c:
	remove "unused parameter" warning

	* common/ifdhandler.c: remove "unused parameter" warnings

	* common/GCCmds.c:
	GCCmds.c:481: attention : assignment discards qualifiers from pointer
	target type

	* GemPC430/Makefile, GemPC410/Makefile: correctly manage LDFLAGS

	Thanks to Arfrever Frehtes Taifersar Arahesis for the patch

2009-02-18  author  <author@debian>

	* MacOSXbuild/ifd-GemPC430/ifd-GemPC430.xcodeproj/project.pbxproj:
	add X Code 2 project

	* MANIFEST: remove build/ files

2009-02-17  author  <author@debian>

	* MacOSXbuild/ifd-GemPC430/build/intermediates/ifd-GemPC430.pbxindex/categories.pbxbtree, MacOSXbuild/ifd-GemPC430/build/intermediates/ifd-GemPC430.pbxindex/decls.pbxbtree, MacOSXbuild/ifd-GemPC430/build/intermediates/ifd-GemPC430.pbxindex/files.pbxbtree, MacOSXbuild/ifd-GemPC430/build/intermediates/ifd-GemPC430.pbxindex/imports.pbxbtree, MacOSXbuild/ifd-GemPC430/build/intermediates/ifd-GemPC430.pbxindex/pbxindex.header, MacOSXbuild/ifd-GemPC430/build/intermediates/ifd-GemPC430.pbxindex/protocols.pbxbtree, MacOSXbuild/ifd-GemPC430/build/intermediates/ifd-GemPC430.pbxindex/refs.pbxbtree, MacOSXbuild/ifd-GemPC430/build/intermediates/ifd-GemPC430.pbxindex/strings.pbxstrings/control, MacOSXbuild/ifd-GemPC430/build/intermediates/ifd-GemPC430.pbxindex/strings.pbxstrings/strings, MacOSXbuild/ifd-GemPC430/build/intermediates/ifd-GemPC430.pbxindex/subclasses.pbxbtree, MacOSXbuild/ifd-GemPC430/build/intermediates/ifd-GemPC430.pbxindex/symbols0.pbxsymbols, MacOSXbuild/ifd-GemPC430/build/intermediates/ifd-GemPC430.indexed-headers, MacOSXbuild/ifd-GemPC430/build/intermediates/ifd-GemPC430.indexed-precomps:
	useless files

	* MANIFEST, MacOSXbuild/ifd-GemPC430/ifd-GemPC430.pbproj/giraud.pbxuser, MacOSXbuild/ifd-GemPC430/ifd-GemPC430.pbproj/project.pbxproj:
	use X Code v2 project

	* MANIFEST: add MacOSXbuild/debuglog.h and MacOSXbuild/ifdhandler.h

	* common/GCdebug.h, common/GemCore.h, GemPC430/usbserial_mosx.c, MacOSXbuild/debuglog.h, MacOSXbuild/ifdhandler.h:
	allow build on Mac OS X using X Code

2008-10-15  author  <author@debian>

	* README: release 1.0.4

	* common/GCCmds.c: Fix powerup sequence when switching to ISO mode

	If somehow the reader/card was in EMV mode, we need to switch it to ISO.
	This was done but the final attemp to powerup tried to power it up in
	EMV mode ... most likely a typo.

	Patch from Sylvain Munaut

	* README: release 1.0.4

	* GemPC410/gbpserial.c: Allow the header to be read in several calls

	Previously, if the header was not read in a single read() calls, there
	was an error. This is an issue because some commands return the two
	first bytes, then a small pause, then the rest of the header ...

	At least this happens on a gci410emv connected thru an usb adapter ...
	Now it works fine.

	Patch from Sylvain Munaut

2007-08-14  author  <author@debian>

	* README: release 1.0.3

	* common/GCCmds.c:
	GCCmdGetOSVersion(): correct a big bug unnoticed for many years and
	declared on PowerPC with gcc 4.x (Debian bug #428323)

	* GemPC410/Makefile, GemPC430/Makefile:
	do not strip the library so we have debug symbols if needed.
	strip should be called by the package build process (if needed)

	* common/GCCmds.c: GCGemCoreError(): log only is text is non NULL

2007-06-29  author  <author@debian>

	* README: release 1.0.2

	* common/GCCmds.c: correctly handle empty response from the reader.

	Thanks to Thomas Galliano for the bug report

	* GemPC430/Makefile, GemPC410/Makefile:
	do not set DESTDIR if not defined

2007-02-05  author  <author@debian>

	* GemPC430/libusb_wrap.c: correctly initialise usbDevice[]

	* common/ifdhandler.c, GemPC410/GemPC410Utils.c, GemPC410/GemPC410Utils.h, GemPC410/gbpserial.c, GemPC410/gbpserial.h, GemPC430/GemPC430Utils.c, GemPC430/GemPC430Utils.h, GemPC430/libusb_wrap.c, GemPC430/libusb_wrap.h:
	LPTSTR -> LPSTR since LPTSTR is deprecated

2006-02-09  author  <author@debian>

	* README: release 1.0.1

	* GemPC430/libusb_wrap.c, common/GCdebug.c, common/ifdhandler.c:
	fix some compilation warnings with gcc 4.0

	* check:
	allow compilation with pcsc-lite-1.2.9-beta10. The script was buggy
	for beta > 9

	* GemPC430/libusb_wrap.c:
	WriteUSB(): remove a useless "POUET" debug message

2005-06-17  author  <author@debian>

	* GemPC430/libusb_wrap.c:
	define interface, bulk_in and bulk_out fields and store the device
	values.
	We need to store them because the libusb structures are now half destroyed
	when the device is removed.

	* README: release 1.0.0

	* GemPC430/Makefile:
	use `pkg-config libpcsclite --variable=usbdropdir` to know where to
	install the driver

	* GemPC410/Makefile:
	use `pkg-config libpcsclite --variable=usbdropdir` to know where to
	install the library

	* GemPC410/Makefile: remove definition of version_major

	* GemPC410/Makefile:
	do not create symbolic links anymore for *.so and *.so.major

	* check: require 1.2.9-beta7 instead of 1.2.9-beta5

	* GemPC410/main.c: replace debug_xxd() by DEBUG_XXD()

	* GemPC410/main.c:
	the device name can be passed as the command line argument

	* GemPC410/gbpserial.c, GemPC430/libusb_wrap.c:
	remove every #ifdef DEBUG_LEVEL_*

	* GemPC410/Config.h, GemPC430/Config.h:
	remove the DEBUG_LEVEL_* definition since we use the dynamic log level of
	log_msg()

	* common/GCCmds.c:
	GCGemCoreError(): use log_msg() instead of debug_msg()

	* common/GCCmds.c:
	GCMakeCommand(): set the error code to no error by default
	if the device disapear the output buffer is not filled so no GemCore
	error is returned

	* common/GCdebug.c:
	define log_msg()/log_xxd() instead of debug_msg()/debug_xxd()

	* common/GCdebug.h: use Log1?() from PCSC/debuglog.h

2004-08-08  author  <author@debian>

	* README: release 0.9.3

	* common/GCCmds.c, common/GCCmds.h: use const attribute when needed

	* GemPC430/libusb_wrap.h:
	*USB functions return status_t and not gcore_t

2004-07-24  author  <author@debian>

	* README: release 0.9.2

	* check: minium pcsc-lite version is now 1.2.9-beta5

	* check: update the URL where new pcsc-lite archives can be fetched

	* common/ifdhandler.c:
	change IFDHControl() API to conform to pcsc-lite 1.2.9-beta5

2004-07-03  author  <author@debian>

	* GemPC410/Config.h, GemPC410/GCGBPTransport.c, GemPC410/GemPC410Utils.c, GemPC410/gbpserial.h, GemPC410/main.c, GemPC410/resetGemPC410.c, GemPC430/Config.h, GemPC430/GCUSBTransport.c, GemPC430/GemPC430Utils.c, common/GCCmds.c, common/GCTransport.h, common/GCUtils.c, common/GCUtils.h, common/GemCore.h, common/ifdhandler.c:
	use C comments /* */ instead of C++ //

	* MANIFEST:
	remove common/{ifdhandler.h,pcscdefines.h,winscard.h,wintypes.h}
	add common/gempc_ifdhandler.h

	* GemPC410/GemPC410Utils.c, GemPC430/libusb_wrap.c, GemPC410/GemPC410Utils.h, GemPC410/gbpserial.c, GemPC410/gbpserial.h, GemPC430/GemPC430Utils.c, GemPC430/GemPC430Utils.h, GemPC430/libusb_wrap.h:
	LPSTR -> LPTSTR

	* GemPC410/GCGBPTransport.c, GemPC410/GemPC410Utils.c, GemPC410/gbpserial.c, GemPC410/main.c, GemPC430/GCUSBTransport.c, GemPC430/GemPC430Utils.c, GemPC430/libusb_wrap.c:
	use #include "gempc_ifdhandler.h"

	* GemPC410/Makefile, GemPC430/Makefile:
	add `pkg-config libpcsclite --cflags` to INCS

	* common/GCCmds.c, common/GCUtils.c, common/GemCore.h, common/gempc_ifdhandler.h, common/ifdhandler.c:
	define PCSCLITE_MAX_READERS

	* common/gempc_ifdhandler.h: GemPC specific declarations

	* common/ifdhandler.h, common/pcscdefines.h, common/winscard.h, common/wintypes.h:
	removed since we now used the one provided by pcsc-lite

	* check: check for pcsclite.h instead of PCSC/pcsclite.h but use
	CHECK_CFLAGS=`pkg-config libpcsclite --cflags`

	* check: check for PCSC/pcsclite.h instead of pcsclite.h

2004-03-24  author  <author@debian>

	* GemPC410/Makefile: define default DESTDIR as /usr/local instead of
	/usr/local/pcsc/drivers/serial. Thanks to Daniel Black for the patch.

2004-02-27  author  <author@debian>

	* README: release 0.9.1

	* common/GCCmds.c, common/GCUtils.c: use new GCGemCoreError() format

	* common/GCCmds.h:
	add char *file, int line, char *function arguments to GCGemCoreError()

	* common/GCdebug.h: add DEBUG_CRITICAL4

	* GemPC430/libusb_wrap.c:
	use pcsc-lite new IFDHCreateChannelByName() scheme: usb:vendor/product

	* GemPC410/Config.h, GemPC430/Config.h, common/GCCmds.c:
	use AUTOMATIC_PPS instead of NO_AUTO_PPS and do not define by default
	for safety instead of speed

2004-02-25  author  <author@debian>

	* GemPC430/TODO.txt: move some old items from todo to done

	* GemPC410/Config.h, GemPC430/Config.h:
	Add definition of NO_AUTO_PPS (commented)

	* common/GCCmds.c:
	do not perform automatic PPS negiciation by the reader firmware if
	NO_AUTO_PPS is defined (some cards need this)

2004-02-21  author  <author@debian>

	* common/GCCmds.c, common/GemCore.h:
	add "Card powered down" 0x15 GemCore error

2004-02-07  author  <author@debian>

	* common/GCCmds.c:
	Do not print the '"Error" returned by the card' message to avoid confusion

	* common/GCCmds.c: add message for GCORE_INVALID_PROC_BYTE (0xE4)

2004-02-02  author  <author@debian>

	* common/pcscdefines.h:
	remove white spaces before #define to avoid gcc-Version 3.3.2 20031022
	warnings. Thanks to Toni Andjelkovic for the patch

2004-01-22  author  <author@debian>

	* README: release 0.9.0

	* GemPC410/TODO.txt:
	support of 3V-5V and "more than one reader" are now present

	* README: latest pcsc-lite are available from alioth now

2004-01-20  author  <author@debian>

	* MANIFEST: remove GemPC410/devfs/ files

	* GemPC410/devfs/README, GemPC410/devfs/libgempc410.conf.d, GemPC410/devfs/libgempc410.devfsd.conf, GemPC410/devfs/libgempc410.devices.d:
	no devfs problems with /dev/pcsc/ is no more used.

	* README.410:
	/dev/pcsc/ is deprecated and DEVICENAME should be used instead of
	CHANNELID with recent pcsc-lite versions (> 1.2.0)

	* GemPC410/Makefile:
	default installation directory is now /usr/local/pcsc/drivers/serial instead
	of /usr/local/lib

	* GemPC430/libusb_wrap.c: remove debug printf

	* MANIFEST:
	rename GemPC410/TODO in GemPC410/TODO.txt to be consistant with GemPC430/TODO.txt

	* GemPC430/libusb_wrap.c: add missing #endif

	* GemPC410/gbpserial.c, GemPC430/libusb_wrap.c, GemPC430/usbserial_mosx.c, common/GCCmds.c, common/GCUtils.c, common/GCdebug.h, common/ifdhandler.c:
	remove function name from DEBUG_* calls

	* GemPC430/Config.h, GemPC430/GemPC430Utils.c, GemPC430/GemPC430Utils.h, GemPC430/libusb_wrap.c, GemPC430/libusb_wrap.h, common/ifdhandler.c, common/ifdhandler.h, GemPC410/Config.h, GemPC410/GemPC410Utils.c, GemPC410/GemPC410Utils.h, GemPC410/gbpserial.c, GemPC410/gbpserial.h, GemPC410/main.c:
	add support of IFDHCreateChannelByName()

	* common/GCdebug.h: add __FUNCTION__ in DEBUG_* messages

2004-01-19  author  <author@debian>

	* GemPC430/libusb_wrap.c:
	use asymetric timeout for USB read and write. The reader/card may be
	busy when we read (long timeout) but should be OK when we write (short timeout)

2003-12-15  author  <author@debian>

	* GemPC410/gbpserial.c: use C instead of C++ comments

	* GemPC430/libusb_wrap.c:
	reset the reader in case of timeout on write (reader freeze?). Thanks to
	Patrick Valsecchi for the patch.

2003-10-27  author  <author@debian>

	* GemPC430/usbserial_mosx.c:
	typo: changed PCSCLITE_MAX_RERADERS to PCSCLITE_MAX_READERS. Thanks to Jakob
	Schlyter for the patch.

2003-10-22  author  <author@debian>

	* README: release 0.8.2

	* GemPC410/Makefile: create $(DESTDIR) only if does not exist yet

	* common/GCUtils.c, common/ifdhandler.c:
	Remove support for multi slot. The code was never used and is now broken
	under revent pcsc-lite versions.

	* common/GCCmds.c, common/GemCore.h:
	add support for CARD_T1_ABORT, READER_T1_ABORT, RESYNC, PTS and
	INVALID_PROC_BYTE GemCore errors

	* GemPC410/Makefile: use $(DESTDIR) instead of $(DESTDIR)/lib/

	* check:
	Explain how to tell check to look elsewhere than just /usr/ and /usr/local/

2003-09-07  author  <author@debian>

	* common/GCCmds.c, common/GemCore.h:
	add 0x10 and 0xF7 GemCore error codes

2003-09-05  author  <author@debian>

	* README: release 0.8.1

	* GemPC410/gbpserial.c: set serial timeout to 1 minute

2003-09-02  author  <author@debian>

	* MANIFEST: removed common/pcsclite.h

	* GemPC410/gbpserial.c, GemPC430/libusb_wrap.c, GemPC430/usbserial_mosx.c, common/GCUtils.c, common/ifdhandler.c, common/pcscdefines.h:
	use PCSCLITE_MAX_READERS instead of PCSCLITE_MAX_CHANNELS (as introduced
	in pcsc-lite-1.2.0-rc1)

	* common/pcsclite.h: useless file. defines are in pcscdefines.h

	* MANIFEST:
	move Info.plist from GemPC430/ifd-GemPC430.bundle/Contents/ to GemPC430/

	* GemPC430/libusb_wrap.c: use a->b notation instead of a[0].b

	* common/GCCmds.c, common/GemCore.h:
	add support of GemCore "Parity error during exchange"

	* GemPC410/Makefile, GemPC430/Makefile, check:
	check uses paths defined in Makefile

	* GemPC410/devfs/libgempc410.devfsd.conf:
	use $devpath instead of $devname otherwise we have /dev/pcsc/1 -> tts/0

2003-08-20  author  <author@debian>

	* GemPC430/Info.plist: use new <array></array> style

2003-08-18  author  <author@debian>

	* GemPC430/usbserial_mosx.c:
	remove \n in debug messages since they are not needed

2003-08-14  author  <author@debian>

	* GemPC410/Makefile, GemPC430/Makefile, common/Makefile:
	do not exit with failure if makedepend(1) does not exist

2003-08-08  author  <author@debian>

	* common/GCCmds.c: Error and not Errror

	* common/GCCmds.c:
	Add " " around Error message when the SW is not 9000.

	* README.410: add a note about DEVICENAME in /etc/reader.conf

2003-08-07  author  <author@debian>

	* MacOSXbuild/ifd-GemPC430/English.lproj/InfoPlist.strings, MacOSXbuild/ifd-GemPC430/build/intermediates/ifd-GemPC430.pbxindex/symbols0.pbxsymbols, MacOSXbuild/ifd-GemPC430/build/intermediates/ifd-GemPC430.indexed-headers, MacOSXbuild/ifd-GemPC430/build/intermediates/ifd-GemPC430.pbxindex/subclasses.pbxbtree:
	These files were not commited in CVS

	* GemPC430/Makefile:
	do not remove ifd-GemPC430.bundle/Contents/Linux anymore since this
	directory is no more created

	* GemPC430/Makefile:
	do not use a intermediary ifd-GemPC430.bundle directory, copy all needed
	file to $DESTDIR directly

	* GemPC410/Makefile, GemPC430/Makefile, common/Makefile:
	update (again) the build of files in common/

	* common/ifdhandler.c:
	FDHGetCapabilities() add support of tag TAG_IFD_SLOTS_NUMBER

2003-06-04  author  <author@debian>

	* GemPC430/Makefile:
	remove ifd-GemPC430.bundle/Contents/Linux in distclean

2003-05-03  author  <author@debian>

	* Makefile: clean/distclean common _after_ GemPC410 and GemPC430

	* common/Makefile, GemPC410/Makefile, GemPC430/Makefile:
	remove *_stamp in distclean and not clean rules

2003-04-12  author  <author@debian>

	* README: release 0.8.0

	* README.410: small typos

	* README.430: small typo

	* Makefile: remove config.log in distclean

	* GemPC430/Makefile, GemPC430/Info.plist:
	library name is versionned (libGemPC430.so.0.8.0)

	* GemPC410/Makefile, GemPC430/Makefile:
	remove rule to build version for an old pcsc-lite

	* GemPC410/Makefile, GemPC430/Makefile:
	optimize common rule (use common_stamp to avoid unnecessary recompilation)

	* GemPC410/Makefile, GemPC430/Makefile, common/Makefile:
	avoid running dep and check rules each time (use stamp files)

2003-04-06  author  <author@debian>

	* GemPC410/main.c: do all the tests (removed goto)

	* common/ifdhandler.h: add prototype for IFDSetEmv()

	* GemPC430/Makefile:
	remove installation of multiple drivers since alias is supported

	* GemPC430/Info.plist: add alias names

2003-03-30  author  <author@debian>

	* common/GCCmds.c, common/GemCore.h, common/ifdhandler.c:
	add support for EMV mode

	* common/GCUtils.c:
	use function GCGemCoreError() in gemcore_status_processing()

	* common/GCCmds.c, common/GCCmds.h: add function GCGemCoreError()

	* common/GCCmds.c:
	Add support of GemCore 2000 Power Up used by GemPC413

	* common/GemCore.h: add 3 new error codes

	* GemPC410/main.c: use debug_xxd() and DEBUG_INFO()

2003-03-21  author  <author@debian>

	* GemPC410/Config.h, GemPC430/Config.h, common/GCdebug.c:
	remove debug using syslog (pcscd logs where needed to be)

2003-03-19  author  <author@debian>

	* common/pcsclite.h: sync with version from pcsc-lite 1.1.2beta3

2003-03-14  author  <author@debian>

	* GemPC430/libusb_wrap.c: change USB timeout from 10 to 60 seconds

2003-03-13  author  <author@debian>

	* check:
	do not use /usr/local/include by default since cpp will warning on some
	systems

2002-11-26  author  <author@debian>

	* GemPC410/Makefile, GemPC430/Makefile:
	do not force use of -O2 -g if CFLAGS is already defined

2002-11-20  author  <author@debian>

	* README: release 0.7.4

	* MANIFEST: add check file

	* Makefile:
	remove removing of config.log in clean rule since it is unneeded here

	* GemPC410/Makefile, GemPC430/Makefile: remove config.log in clean rule

	* GemPC410/gbpserial.c:
	on arm, powerpc and s390 "char" is unsigned by default. So use an
	explicit "signed char". Thank to Gerhard Tonn for looking at Debian
	autobuilder logs.

	* README.430:
	add comment on how to compile the USB driver (install libusb, etc.)

	* GemPC430/Makefile, GemPC410/Makefile, Makefile:
	add support of the ./check script

	* check:
	script used to test the correct version of pcsc-lite and libusb

2002-10-18  author  <author@debian>

	* README: release 0.7.3

	* GemPC430/libusb_wrap.c: support hotplug _after_ pcscd is started.

2002-10-15  author  <author@debian>

	* README: release 0.7.2

	* GemPC410/gbpserial.c:
	rename variable fd_set to fdset to avoid a name clash with structure
	fd_set

	* README: release 0.7.1

	* GemPC410/gbpserial.c: add #include <sys/types.h>

	* GemPC410/main.c: add #include <string.h>

	* GemPC410/Makefile, GemPC430/Makefile, common/Makefile:
	remove CC=gcc definition

2002-10-13  author  <author@debian>

	* README: add comment about makedepend(1)

	* README: add comment about devfs

	* README: release 0.7.0

	* MacOSXbuild/ifd-GemPC430/ifd-GemPC430.pbproj/giraud.pbxuser, MacOSXbuild/ifd-GemPC430/ifd-GemPC430.pbproj/project.pbxproj:
	new version

	* GemPC430/usbserial_mosx.c:
	- better stability and multiple reader support
	- the productId is now read from the Info.plist. This allow to support
	readers like the 432 and 435 without recompiling the library

2002-10-10  author  <author@debian>

	* GemPC430/usblinux.c, GemPC430/usblinux.h, GemPC430/usbserial_linux.c:
	Removed. Replaced by libusb_wrap.c and libusb_wrap.h

	* GemPC430/README.Linux: Removed. See README.430 instead

	* GemPC430/libusb_wrap.c:
	test dev->config != NULL before accessing the structure

	* GemPC410/Makefile, GemPC430/Makefile, MANIFEST, common/Makefile:
	do not remove but empty .dependencies files in clean and distclean
	rules. We need the makedepend(1) command to regenerate these files and
	this command comes with XFree which is not installed on console only
	systems.

	* GemPC410/gbpserial.c:
	use select() instead of termios.c_cc[VTIME] = 100 to timeout since it
	did not worked under FreeBSD

	* README.410:
	FreeBSD (4.7-RC2) and OpenBSD (3.1) do not use the same name for the
	serial port devices

2002-10-09  author  <author@debian>

	* GemPC430/Makefile:
	add /usr/local/include and /usr/local/lib paths needed when libusb is
	installed in /usr/local/

	* common/Makefile, GemPC410/Makefile, GemPC430/Makefile:
	do not remove .dependencies files since makedepend(1) is not installed
	by default.

2002-10-06  author  <author@debian>

	* GemPC410/Makefile:
	avoid GNU options in cp(1) and install(1). Some Unix systems are not GNU.

	* GemPC430/libusb_wrap.c: lots of debug

	* GemPC430/Makefile: link the driver against libusb

	* GemPC410/main.c:
	shutdown the driver before exiting even if no card is present

2002-10-03  author  <author@debian>

	* common/ifdhandler.c: - add lun in log info
	- completely remove unused and buggy mutex use (the driver shall be reentrant)

	* GemPC410/gbpserial.c:
	- add channel information in open device structure to detect a double
	  usage
	- log Lun in low level input/output logs
	- use one buffer per reader (instead of a global one) to be reentrant
	- optimise the open port in case Host and IFD both at 38400 bauds
	  already (normal case for a pcscd restart on Linux)

2002-09-27  author  <author@debian>

	* GemPC430/Makefile, GemPC430/libusb_wrap.c, GemPC430/libusb_wrap.h:
	port to libusb library

2002-09-26  author  <author@debian>

	* common/ifdhandler.c:
	start support of multi reader: add mutex to avoid race problems

	* GemPC430/Makefile, GemPC430/usbserial_linux.c:
	start support for more than one reader with the same library

	* GemPC410/Makefile, GemPC410/gbpserial.c:
	add support for more than one reader with the same library

	* README.430: add a section on USB support under Linux

2002-09-22  author  <author@debian>

	* GemPC410/TODO.txt:
	do not reset the card if the command timeout: DONE, a workaround is
	given

	* GemPC410/devfs/README, GemPC410/devfs/libgempc410.conf.d, GemPC410/devfs/libgempc410.devfsd.conf, GemPC410/devfs/libgempc410.devices.d, README.410:
	add devfsd configuration files in devfs/ and support in README.410

2002-09-18  author  <author@debian>

	* README.430: add a note about /proc/bus/usb/ directory under Linux

	* GemPC410/TODO.txt:
	The GCR400 and GCR410 will NOT be supported. So removed from the TODO
	list.

	* common/GCCmds.c, common/GemCore.h:
	add "Incorrect number of arguments" GemCore error message

	* GemPC410/GCGBPTransport.c, GemPC410/gbpserial.c, GemPC410/gbpserial.h:
	retry the last command if GBP returns a wrong first byte (NAD)

2002-09-08  author  <author@debian>

	* GemPC410/gbpserial.c:
	use the simpler GCCmdSetMode command instead of GCCmdCardStatus

	* GemPC410/gbpserial.c:
	use a SetSerialSpeed macro to factorise code. Add debug messages even
	when the OpenGBP() returns OK to know what init branch was taken.

	* GemPC410/GCGBPTransport.c: sequence 0 -> sequence n0

	* GemPC410/resetGemPC410.c: PCB of reset command was wrong

2002-09-07  author  <author@debian>

	* GemPC410/GCGBPTransport.c, GemPC410/gbpserial.c, GemPC410/gbpserial.h:
	add support for GemCore Repeat requests

	* common/GCdebug.h:
	file Config.h not included -> file Config.h NOT included

	* GemPC410/Config.h: comment DEBUG_LEVEL_PERIODIC and DEBUG_LEVEL_COMM

	* create_distrib.sh:
	add test to avoid releasing a version with too much DEBUG on

2002-08-16  author  <author@debian>

	* GemPC430/Makefile: change libGemPC430 to libGemPC430.so

	* common/GCdebug.c: moved from GemPC410

	* common/GCdebug.c: removed

	* README: release 0.6.5

	* GemPC410/Makefile, GemPC430/Makefile:
	correct clean rule to take care of _old_pcscd versions

	* GemPC430/Makefile: add old_pcscd and libGemPC430_old_pcscd rules

	* GemPC410/Makefile: add old_pcscd and libGemPC410_old_pcscd.so rules

	* GemPC410/Makefile, GemPC430/Makefile, common/Makefile:
	GCdebug.c is now in common/ again

	* Makefile: rewrote install rule

	* GemPC410/gbpserial.c:
	hacked again the initialisation. It did not work since: the
	GCCmdConfigureSIOLine will OFTEN fails since the GemCore response is
	sent using the NEW speed but GCMakeCommand do not know how to handle
	this.

	* GemPC410/main.c: removed Log history

	* GemPC410/TODO.txt:
	"create /dev/pcsc/[1-4]" and "support hot unplug/replug" mark done
	"do not reset the card if the command timeout" added

	* GemPC410/Config.h, GemPC430/Config.h:
	renamed GemPC410 to GemPC41x and GemPC430 to GemPC43x
	add DEBUG_SYSLOG #define (undefined by default)

2002-08-13  author  <author@debian>

	* GemPC410/Makefile, GemPC430/Makefile: remove GCdebug.o in clean rule

	* GemPC430/Makefile, GemPC410/Makefile:
	install in /usr/local by default

	* common/ifdhandler.c: do not debug APDU. This is done by pcscd now

	* common/GCdebug.h, common/Makefile:
	now use the debug facilities from pcscd

	* common/GCCmds.c: repagination of comments

2002-08-12  author  <author@debian>

	* GemPC410/resetGemPC410.c: add a reset GemCore call

	* GemPC410/gbpserial.c: add state name in the OpenGBP() error messages

	* GemPC410/Makefile:
	do not link the driver with GCdebug.o since we now use the debug
	functions of pcscd

	* GemPC430/Makefile, GemPC430/usbserial_linux.c:
	support for 432 and 435 readers

	* GemPC410/Config.h, GemPC430/Config.h:
	remove DEBUG_LEVEL_APDU and DEBUG_STDERR since we now use pcscd debug
	functions

2002-08-02  author  <author@debian>

	* GemPC430/usbserial_linux.c: add support for more than one reader
	add support for GemPC 435

2002-08-01  author  <author@debian>

	* GemPC410/Makefile, GemPC430/Makefile:
	add an "all" dependency in the "install" target (thanks Joe Phillips)

2002-07-31  author  <author@debian>

	* GemPC410/Makefile: create destination directory in install rule

	* Makefile: add make install target

2002-05-23  author  <author@debian>

	* README: release 0.6.4

2002-05-21  author  <author@debian>

	* GemPC410/main.c: exit if powerup fails

	* common/GCCmds.c:
	perform a powerup without PPS managment is the powerup with PPS
	managment failed

	* GemPC410/resetGemPC410.c:
	minimum size for a GBP bloc is 4 bytes and not 5

	* GemPC410/main.c: add an error message

2002-05-19  author  <author@debian>

	* GemPC430/Makefile, common/Makefile: add -f to rm .dependencies

	* GemPC410/gbpserial.c, GemPC410/resetGemPC410.c:
	change sys_errlist[errno] to strerror(errno) to be (more) ready for the Hurd

	* GemPC410/Makefile: add -f to rm .dependencies

	* GemPC430/usbserial_linux.c:
	print comm debug messages only if DEBUG_LEVEL_COMM is defined

	* GemPC430/Makefile, common/Makefile:
	correctly remove .dependencies file

2002-05-09  author  <author@debian>

	* README: release 0.6.3

	* common/ifdhandler.c:
	Case1 APDU now uses a (null length) ISO IN instead of ISO OUT

	* common/GCUtils.c:
	case nlength==0 in ISO_INPUT is used for Case1 APDUs

	* README.410: Add info on /dev/pcsc/ for OpenBSD and FreeBSD

2002-04-03  author  <author@debian>

	* GemPC410/main.c: clear SendPci and RecvPci structures before use
	add IFD_PROTOCOL_NOT_SUPPORTED error case

	* GemPC410/gbpserial.c:
	changed cfsetospeed() and cfsetispeed() to one cfsetspeed()

	* GemPC410/Makefile:
	libGemPC410.so rule: remove target before creation (needed to avoid
	loops under OpenBSD)

2002-04-01  author  <author@debian>

	* README: release 0.6.2

	* MacOSXbuild/ifd-GemPC430/build/intermediates/ifd-GemPC430.indexed-precomps, MacOSXbuild/ifd-GemPC430/build/intermediates/ifd-GemPC430.pbxindex/decls.pbxbtree, MacOSXbuild/ifd-GemPC430/build/intermediates/ifd-GemPC430.pbxindex/files.pbxbtree, MacOSXbuild/ifd-GemPC430/build/intermediates/ifd-GemPC430.pbxindex/imports.pbxbtree, MacOSXbuild/ifd-GemPC430/build/intermediates/ifd-GemPC430.pbxindex/pbxindex.header, MacOSXbuild/ifd-GemPC430/build/intermediates/ifd-GemPC430.pbxindex/refs.pbxbtree, MacOSXbuild/ifd-GemPC430/build/intermediates/ifd-GemPC430.pbxindex/strings.pbxstrings/control, MacOSXbuild/ifd-GemPC430/build/intermediates/ifd-GemPC430.pbxindex/strings.pbxstrings/strings:
	new version of build files

	* MANIFEST:
	add file MacOSXbuild/ifd-GemPC430/build/intermediates/ifd-GemPC430.indexed-headers

	* GemPC430/usbserial_mosx.c: Fixes for multi-reader support

	* common/GCCmds.c: GCCmdPowerUp() power up with auto PPS management

	* common/ifdhandler.c, common/ifdhandler.h:
	add case TAG_IFD_SIMULTANEOUS_ACCESS in IFDHGetCapabilities()

	* GemPC410/gbpserial.c:
	complete reimplementation of serial port configuration
	correct treatment when IFD send a 0x04 instead of a 0x24 (NAD_IFD2HOST)

	* create_distrib.sh: make distclean defore archiving

	* GemPC410/Makefile, GemPC430/Makefile, Makefile, common/Makefile:
	add distclean rule in all Makefiles

	* MacOSXbuild/ifd-GemPC430/ifd-GemPC430.pbproj/giraud.pbxuser, MacOSXbuild/ifd-GemPC430/ifd-GemPC430.pbproj/project.pbxproj:
	new files in CVS

2002-03-27  author  <author@debian>

	* GemPC410/Makefile, common/Makefile: correct make dep rule

	* common/GCCmds.c:
	GCCmdSetMode() returns OK when GemCore answers GCORE_UNKNOWN_CMD since
	the command is disabled when ROS mode is disabled (native only).

	* GemPC410/gbpserial.c: remove debug printf()
	changed %02X to 0x%02X

2002-03-11  author  <author@debian>

	* README: release 0.6.1

	* GemPC410/gbpserial.c: changed again the serial port opening

2002-03-07  author  <author@debian>

	* README: release 0.6.0

	* GemPC410/.dependencies: removed

	* GemPC410/Makefile: clean rule: remove Makefile.bak .dependencies

	* common/Makefile: clean rule: remove tags file

	* common/ifdhandler.c: forgot a closing }

	* common/ifdhandler.c:
	Debug in IFDHSetCapabilities and IFDHICCPresence is now PERIODIC
	IFDHTransmitToICC: now manage case 1 APDU (only CLA, INS, P1, P2) as an
	outgoing APDU (CLA, INS, P1, P2, 0)

	* common/GCdebug.h: add DEBUG_PERIODIC definitions

	* common/GCCmds.c: Debug in GCCmdCardStatus is now PERIODIC

	* GemPC410/gbpserial.c:
	rewrote the serial port BAUDS setting during open()

	* GemPC410/Config.h, GemPC430/Config.h: document log levels
	add new log level: DEBUG_LEVEL_PERIODIC

2002-03-05  author  <author@debian>

	* common/GCUtils.c: replaced 2 by the equivalent constant ISO_SIZE_SW

2002-03-03  author  <author@debian>

	* README: release 0.5.10

	* GemPC410/main.c: add hexa values of max length
	add a new test (commented by default)

	* GemPC410/Makefile:
	add -f in 'ln -s' to avoid error if the link already exist

	* common/GCUtils.c:
	Correct a bug when more than 252 output bytes are expected and less than
	that are available (which is the case when the card sends an error)

	* common/GCCmds.c: add command options for IFD_CMD_ICC_POWER_UP
	disable PPS management (needed by some kinds of Cyberflex Access cards)

	* GemPC410/Makefile:
	modify install: rule to include release version number in filename,
	create symlinks, remove execution right on the .so lib

	* GemPC410/main.c: changed default serial port

2002-02-16  author  <author@debian>

	* README.410: Add a script to create the /dev/pcsc/? links

	* GemPC410/.dependencies, GemPC410/Makefile:
	change the way compilation dependencies are generated and stored

2001-12-09  author  <author@debian>

	* GemPC410/GemPC410Utils.c, GemPC430/GemPC430Utils.c, common/GCCmds.c:
	guarantee that the os_string is \0 terminated

2001-12-06  author  <author@debian>

	* GemPC410/resetGemPC410.c, GemPC410/gbpserial.c:
	use cfgetospeed()/cfsetospeed() instead of accessing directly the
	termios structure

2001-12-04  author  <author@debian>

	* create_distrib.sh:
	support direcory names containing numbers and not just digits (add a \+
	to the sed pattern matching)

2001-12-02  author  <author@debian>

	* common/ifdhandler.c: also log APDU results

	* GemPC410/gbpserial.c: changed DEBUG_COMM to DEBUG_LEVEL_COMM

2001-12-01  author  <author@debian>

	* GemPC430/Config.h:
	revert to just "#define foo" instead of "#define foo 1"

	* GemPC410/GemPC410Utils.c, GemPC430/GemPC430Utils.c:
	avoid a non NULL terminated string on the GemCore version string

2001-11-30  author  <author@debian>

	* README: release 0.5.9

	* MANIFEST: add ProjectBuilder folder for MacOS X

	* MacOSXbuild/ifd-GemPC430/build/intermediates/ifd-GemPC430.pbxindex/categories.pbxbtree, MacOSXbuild/ifd-GemPC430/build/intermediates/ifd-GemPC430.pbxindex/decls.pbxbtree, MacOSXbuild/ifd-GemPC430/build/intermediates/ifd-GemPC430.pbxindex/files.pbxbtree, MacOSXbuild/ifd-GemPC430/build/intermediates/ifd-GemPC430.pbxindex/imports.pbxbtree, MacOSXbuild/ifd-GemPC430/build/intermediates/ifd-GemPC430.pbxindex/pbxindex.header, MacOSXbuild/ifd-GemPC430/build/intermediates/ifd-GemPC430.pbxindex/protocols.pbxbtree, MacOSXbuild/ifd-GemPC430/build/intermediates/ifd-GemPC430.pbxindex/refs.pbxbtree, MacOSXbuild/ifd-GemPC430/build/intermediates/ifd-GemPC430.pbxindex/strings.pbxstrings/control, MacOSXbuild/ifd-GemPC430/build/intermediates/ifd-GemPC430.pbxindex/strings.pbxstrings/strings, MacOSXbuild/ifd-GemPC430/build/intermediates/ifd-GemPC430.indexed-precomps:
	added ProjectBuilder folder for MacOS X

	* common/GCUtils.c: change an IFD_SUCCESS to STATUS_SUCCESS

	* GemPC430/usbserial_mosx.c: add #include "GemCore.h"

2001-11-27  author  <author@debian>

	* README: release 0.5.8

	* create_distrib.sh: do not exclude create_distrib.sh
	remove temporary directory at exit (including by Ctrl-C)

	* MANIFEST: include create_distrib.sh

	* create_distrib.sh:
	correct first line to be #!/bin/bash instead of #/bin/sh

	* MANIFEST, README:
	removed GemPC430/main.c since the file does not exist anymore

	* GemPC410/GCGBPTransport.h: unsued and then deleted

	* create_distrib.sh:
	add -p to mkdir to also create parent directory if it does not exist

	* MANIFEST: removed deleted files

	* README: release 0.5.7

	* GemPC430/ifd-GemPC430.pbproj/giraud.pbxuser, GemPC430/ifd-GemPC430.pbproj/project.pbxproj, GemPC430/English.lproj/InfoPlist.strings:
	Useless file (not distributed in the archive)

	* common/GCUtils.c:
	change return test from IFD_SUCCESS to STATUS_SUCCESS

	* GemPC410/Makefile: removed automatically generated depends lines

	* GemPC430/usblinux.c:
	closedir() only if the device is found and usable (write access)
	the code crashed with two USB readers

	* GemPC410/Makefile, GemPC410/main.c:
	Implement ISO 7816 Case 2, 3 and 4 with full length tests

	* GemPC410/main.c:
	add a pcsc_error() function instead of code duplication
	add ReaderTest (Java test applet) APDU for ISO 7816 Case 1

	* GemPC410/resetGemPC410.c: print more error messages

	* GemPC410/gbpserial.c: "OpenGBP" instead of "OpenUSB"
	print error message in case of tcgetattr() fails

	* common/GCUtils.c:
	add support for IFD_ICC_NOT_PRESENT GemCore error status

2001-11-24  author  <author@debian>

	* GemPC410/gbpserial.c: prepare to support multi serial reader

	* GemPC430/usbserial_mosx.c:
	remove \n in log messages and change %08x to 0x%08X

	* GemPC430/usbserial_mosx.c: use TRUE & FALSE instead of 1 & 0

	* GemPC430/usbserial_linux.c: use USB_TIMEOUT #define instead of 10000

	* GemPC430/usbserial_linux.c: prepare support for multi USB readers

	* common/GCdebug.h: add DEBUG_COMM3()

	* GemPC410/gbpserial.c:
	do not limit to 4 readers anymore (accept channel >= 4)

2001-11-23  author  <author@debian>

	* common/GCCmds.c: add #include <string.h>

2001-11-22  author  <author@debian>

	* GemPC410/gbpserial.c: removed $Log$

	* GemPC410/GCGBPTransport.c, GemPC410/gbpserial.c, GemPC410/gbpserial.h:
	differentiate return values of gbpserial.c regarding GBP errors.

	* GemPC410/gbpserial.c:
	use explain_gbp() to log a descriptive GBP level error message

	* MANIFEST: add README.410

	* common/Makefile: use OBJS= to avoid repetitions

	* README, README.410: README.410 is specific to libGemPC410.so

	* GemPC410/GemPC410Utils.c:
	log "OS string" at CRITICAL level to always have it the logs

	* GemPC410/Makefile:
	do not compile directly files in common/ but use 'make -C ../common'
	(avoid '../common/[...]' in log messages)

	* GemPC430/Makefile:
	do not compile directly files in common/ but use "make -C ../common"
	(avoid "../common/[...]" in log messages)

	* GemPC430/GemPC430Utils.c:
	log "OS string" at CRITICAL level to always have it the logs

	* GemPC430/TODO.txt: done:
	 - re-organise sources of ifdhandler.c
	 - modify ifdhandler.c from GemPC430 to GemPC
	 - use a more elegant mechanism for log_function

	* common/ifdhandler.c: Source file reindentation

	* common/ifdhandler.c: Add APDU logging

	* GemPC430/GemPC430Utils.c: Get and print the GemCore version

	* GemPC410/GemPC410Utils.c: reindent

	* GemPC430/usblinux.c:
	Print USB device info in 0x%04X format instead of %d

	* GemPC430/usblinux.c:
	Open /proc/bus/usb/00x/00y in read only mode to find the good device.
	When identified the device is re-opened read/write.

	* GemPC430/usblinux.c: use DEBUG_CRITICAL3 to be more informative

	* common/GCdebug.h: added support for DEBUG_CRITICAL3()

2001-11-15  author  <author@debian>

	* README: release 0.5.6

	* common/pcscdefines.h: define type status_t

	* common/ifdhandler.c: add argument &length to GCCmdCardStatus

	* common/GemCore.h: define type gcore_t

	* common/GCUtils.h:
	change return values type from RESPONSECODE to ifd_t

	* common/GCUtils.c: reindentation
	change return value types from RESPONSECODE to ifd_t
	correct return value of functions called

	* common/GCTransport.h:
	change return values type from RESPONSECODE to status_t

	* common/GCCmds.h: change return values type from RESPONSECODE to ifd_t

	* common/GCCmds.c:
	migration of GCCmdConfigureSIOLine() to GCMakeCommand()

	* common/GCCmds.c: change return values type from RESPONSECODE to ifd_t
	complete migration from GCSendCommand() to GCMakeCommand()

	* GemPC410/resetGemPC410.c: small typo

	* GemPC410/main.c: add IFDHTransmitToICC test
	print return values (SW)

	* GemPC410/gbpserial.c:
	removed GCCmdGetOSVersion() and GCCmdSetMode() (moved to GemPC410Utils.c)
	add explain_gbp() (only used for GBP debug)

	* GemPC410/TODO.txt:
	add "create /dev/pcsc/[1-4] at module installation"

	* GemPC410/Makefile: add -D_REENTRANT compilation flag
	add strip --strip-unneeded on the library

	* GemPC410/GemPC410Utils.c:
	add GCCmdGetOSVersion() call. result not yet checked.

	* GemPC410/GCGBPTransport.c: change return value type from to status_t

	* GemPC430/main.c: removed and use ../GemPC410/main.c instead

	* GemPC430/usbserial_linux.c, GemPC430/usbserial_mosx.c:
	change return value types from to status_t

	* GemPC430/usbserial_linux.c, GemPC430/usbserial.h:
	change return value types from RESPONSECODE to gcore_t

	* GemPC430/usblinux.c:
	print the error message instead of the filename when open fail

	* GemPC430/Makefile:
	use main.c from ../GemPC410/ to avoid code duplication

	* GemPC430/GemPC430Utils.h, GemPC430/GemPC430Utils.c:
	OpenGemPC430() CloseGemPC430(): change return value type from RESPONSECODE to ifd_t

	* GemPC430/GCUSBTransport.c:
	change return value type from RESPONSECODE to status_t

2001-11-08  author  <author@debian>

	* common/GCCmds.c, common/GemCore.h:
	Added GemCore error code "Card Absent"

2001-11-07  author  <author@debian>

	* common/GCCmds.c, common/GCCmds.h, common/GCUtils.h:
	removed "All rights reserved" which is a nonsense for an Free Software

	* common/GCUtils.c: iLunCheck(): add a test (LunToReaderIndex(Lun) < 0)

	* README: release 0.5.5

	* GemPC410/GemPC410Utils.c, GemPC410/GemPC410Utils.h: new files

	* GemPC430/usbserial_linux.c:
	define USBMAX_READERS as (PCSCLITE_MAX_CHANNELS) instead of 4

	* GemPC430/usbserial_mosx.c:
	use DEBUG_XXD instead of a for (i=0;...) loop in WriteUSB() also

	* GemPC410/Makefile: added the install rule

	* MANIFEST: added common/{pcsclite.h, winscard.h, wintypes.h}

	* GemPC430/Makefile:
	remove ifd-GemPC430.bundle/Contents/Linux/libGemPC430.so in rule clean

	* GemPC430/Info.plist: new file

	* GemPC430/Makefile: renamed ifd-GemPC430 to libGemPC430.so

	* common/pcsclite.h, common/winscard.h, common/wintypes.h:
	new files nedded to compile the drivers without installing pcscd before.
	This solves a chicken and egg problem under Debian

	* GemPC430/GemPC430Utils.c, GemPC430/Makefile:
	removed the "," in DEBUG_CRITICAL("OpenUSB failed", );

	* GemPC410/Makefile: add GemPC410Utils.o to the list of objects

	* GemPC410/Config.h:
	change OpenGBP, CloseGBP to OpenGemPC410, CloseGemPC410

	* common/ifdhandler.c:
	changed ../GemPC410/gbpserial.h to ../GemPC410/GemPC410Utils.h

	* MANIFEST: added GemPC410/GemPC410Utils.c and GemPC410/GemPC410Utils.h

	* GemPC430/GemPC430Utils.c: changed CloseREADER_NAME to CloseUSB

	* GemPC430/GemPC430Utils.c: removed a silly #include "GemPC430Utils.c"

	* GemPC430/GemPC430Utils.c, GemPC430/GemPC430Utils.h:
	removed "All rights reserved." which is in contradiction with COPYING

	* GemPC430/usbserial.h:
	go back to xxxUSB from xxxGemPC430. This is not the good layer to patch.

	* GemPC430/GemPC430Utils.c: change OpenREADER_NAME to OpenUSB

	* GemPC430/Config.h:
	Changed back to ReadUSB and WriteUSB from a wrong patch to ReadGemPC430
	and WriteGemPC430

	* README: changed <jl.giraud@free.fr> to <jlgiraud@mac.com>

	* common/ifdhandler.c:
	renamed ../GemPC430/usbserial.h to ../GemPC430/GemPC430Utils.h

	* common/GCdebug.c: changed LOG_DEBUG to LOG_INFO in syslog()

	* common/GCUtils.c: add #include "GCTransport.h"

2001-11-06  author  <author@debian>

	* GemPC430/usbserial_mosx.c:
	use DEBUG_XXD instead of a for (i=0;...) loop

	* GemPC430/usbserial_mosx.c: Change log_fucntion() to DEBUG_xyz()

	* GemPC430/usbserial.h: add #ifndef _USBSERIAL_H_ test

	* GemPC430/GemPC430Utils.h: Added argument channel to OpenGemPC430()

	* GemPC430/usbserial.h: renamed xxUSB into xxGemPC430

	* GemPC430/GemPC430Utils.c: Added argument channel to OpenGemPC430()

	* GemPC430/Config.h: renamed xxUSB into xxGemPC430

	* common/GCCmds.c: removed GCCmdRestart() which is not used anywhere

2001-10-29  author  <author@debian>

	* GemPC430/GemPC430Utils.c: change .c into .h

	* GemPC430/Makefile, GemPC410/Makefile:
	define GEMPC in the 'make dep' rule

2001-10-28  author  <author@debian>

	* MANIFEST: renamed COPYING to COPYING.BSD or COPYING.GPL

	* GemPC430/Makefile: rm -r for ifd-GemPC430.bundle

	* common/GCUtils.c: Added a comment for iLunCheck() return value

	* common/GCUtils.c: Changed inegality check in iLunCheck()

	* README: added history and licences parts

	* common/GCCmds.c, common/GCCmds.h, common/GCTransport.h, common/GCUtils.c, common/GCUtils.h, common/GCdebug.c, common/GCdebug.h, common/GemCore.h, common/ifdhandler.c, common/ifdhandler.h, common/pcscdefines.h:
	added reference to the double licence BSD/GPL except for ifdhandler.c
	and ifdhandler.h which are written by David Corcoran and are under BSD
	only.

	* common/COPYING, common/COPYING.BSD, common/COPYING.GPL:
	renamed COPYING to COPYING.BSD and added COPYING.GPL

	* GemPC430/GemPC430Utils.c, GemPC430/GemPC430Utils.h, GemPC430/usblinux.c, GemPC430/usblinux.h, GemPC430/usbserial.h, GemPC430/usbserial_linux.c, GemPC430/usbserial_mosx.c:
	Added licence reference

	* GemPC410/CmdGemCore.c, GemPC410/CmdGemCore.h:
	removed CmdGemCore.h CmdGemCore.c (they are in common/ now)

	* GemPC410/COPYING, GemPC410/COPYING.GPL, GemPC410/GCGBPTransport.h, GemPC410/TODO.txt, GemPC410/resetGemPC410.c:
	Add GPL text in source files

2001-10-25  author  <author@debian>

	* MANIFEST, GemPC430/Makefile, GemPC430/main.c, GemPC430/GemPC430Utils.c, GemPC430/GemPC430Utils.h, GemPC430/Config.h, GemPC430/Config.h_do_not_use_anymore, GemPC430/GCUSBTransport.h, common/COPYING, common/GCCmds.c, common/GCCmds.h, common/GCTransport.h, common/GCUtils.c, common/GCUtils.h, common/GCdebug.c, common/GCdebug.h, common/debug.c, common/debug.h, GemPC410/Config.h, GemPC410/GCGBPTransport.c, GemPC410/Makefile, GemPC410/gbpserial.c, GemPC410/gbpserial.h, GemPC410/main.c, common/GemCore.h, common/Makefile, common/ifdhandler.c, Makefile, create_distrib.sh, GemPC430/GCUSBTransport.c, GemPC430/README.Linux, GemPC430/usblinux.c, GemPC430/usbserial.h, GemPC430/usbserial_linux.c:
	*** empty log message ***

2001-10-22  author  <author@debian>

	* GemPC410/COPYING, GemPC410/CmdGemCore.c, GemPC410/CmdGemCore.h, GemPC410/GCGBPTransport.c, GemPC410/GCGBPTransport.h, GemPC410/Makefile, GemPC410/gbpserial.c, GemPC410/gbpserial.h, GemPC410/main.c, GemPC410/resetGemPC410.c, GemPC430/COPYING, GemPC430/Config.h_do_not_use_anymore, GemPC430/English.lproj/InfoPlist.strings, GemPC430/GCUSBTransport.c, GemPC430/GCUSBTransport.h, GemPC430/Makefile, GemPC430/README.Linux, GemPC430/TODO.txt, GemPC430/ifd-GemPC430.pbproj/giraud.pbxuser, GemPC430/ifd-GemPC430.pbproj/project.pbxproj, GemPC430/usblinux.c, GemPC430/usblinux.h, GemPC430/usbserial.h, GemPC430/usbserial_linux.c, GemPC430/usbserial_mosx.c, Makefile, README, common/GemCore.h, common/Makefile, common/debug.c, common/debug.h, common/ifdhandler.c, common/ifdhandler.h, common/pcscdefines.h:
	Imported sources

	* GemPC410/COPYING, GemPC410/CmdGemCore.c, GemPC410/CmdGemCore.h, GemPC410/GCGBPTransport.c, GemPC410/GCGBPTransport.h, GemPC410/Makefile, GemPC410/gbpserial.c, GemPC410/gbpserial.h, GemPC410/main.c, GemPC410/resetGemPC410.c, GemPC430/COPYING, GemPC430/Config.h_do_not_use_anymore, GemPC430/English.lproj/InfoPlist.strings, GemPC430/GCUSBTransport.c, GemPC430/GCUSBTransport.h, GemPC430/Makefile, GemPC430/README.Linux, GemPC430/TODO.txt, GemPC430/ifd-GemPC430.pbproj/giraud.pbxuser, GemPC430/ifd-GemPC430.pbproj/project.pbxproj, GemPC430/usblinux.c, GemPC430/usblinux.h, GemPC430/usbserial.h, GemPC430/usbserial_linux.c, GemPC430/usbserial_mosx.c, Makefile, README, common/GemCore.h, common/Makefile, common/debug.c, common/debug.h, common/ifdhandler.c, common/ifdhandler.h, common/pcscdefines.h:
	New file.

